 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Super Fast Recovery Diode RF071L4S Series Standard Fast Recovery Dimensions(Unit : mm) Land size figure(Unit : mm) 2.0 2.0 Applications General rectification PMDS Features 1)Small power mold type.(PMDS) 2)high switching speed 3)Low forward voltage Structure Construction Silicon epitaxial planer Taping dimensions(Unit : mm) 4.00.1 2.00.05 1.550.05 1.75 0.1 0.3 5.5 0.05 1.55 2.90.1 4.00.1 2.8MAX Absolute maximum ratings (Tl=25C) Parameter Symbol Repetitive peak reverse voltage Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature Electrical characteristics(Tj=25C) Parameter Forward voltage Reverse current Reverse recovery time Thermal resistance VRM VR Io IFSM Tj Tstg Conditions D0.5 Direct voltage Glass epoxy substrate mounted Tl=120C 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C 5.3 0.1 0.05 9.5 0.1 Limits 400 400 1 15 150 -55to+150 12 0.2 4.2 Unit V V A A C C Symbol VF IR trr Rth(j-l) Conditions IF=0.7A VR=400V IF=0.5A,IR=1A,Irr=0.25xIR junction to lead Min. Typ. 1 0.01 20 Max. 1.25 10 25 23 Unit V A ns C/W www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.A RF071L4S Data Sheet Electrical characteristics curves 10 1000 CAPACITANCE BETWEEN TERMINALS : Ct(pF) 100 f=1MHz 1 REVERSE CURRENT : I R(nA) FORWARD CURRENT : I F(A) Tj=125C Tj=150C 100 Tj=125C 10 Tj=75C Tj=150C 0.1 Tj=25C 10 0.01 Tj=75C 1 Tj=25C 0.001 0 500 1000 1500 2000 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 0.1 0 100 200 300 400 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 1 0 5 10 15 20 25 REVERSE VOLTAGE : V R(V) VR-Ct CHARACTERISTICS 30 1100 IF=0.7A Tj=25C n=30pcs 10 CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj=25C VR=400V n=30pcs 40 f=1MHz VR=0V Tj=25C 30 AVE : 29.2pF FORWARD VOLTAGE : V F(mV) 1050 REVERSE CURRENT : I R(nA) 1000 1 AVE : 4.2nA 20 950 AVE : 980.8mV 900 VF DISPERSION MAP 0.1 IR DISPERSION MAP 10 Ct DISPERSION MAP 80 Ifsm 60 8.3ms 1cyc RESERVE RECOVERY TIME : trr(ns) 30 25 20 15 10 5 0 IFSM DISRESION MAP trr DISPERSION MAP AVE : 20.1ns IF=0.5A IR=1A Irr=0.25*IR Tj=25C 1000 PEAK SURGE FORWARD CURRENT : I FSM(A) PEAK SURGE FORWARD CURRENT : I FSM(A) Ifsm 100 8.3ms 8.3ms 1cyc 40 AVE : 41.2A 20 10 0 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 1000 100 100 30 IM=10mA IF=100mA ELECTROSTATIC DISCHARGE TEST ESD(KV) TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) 25 AVE : 14.1kV Rth(j-a) 100 1ms PEAK SURGE FORWARD CURRENT : I FSM(A) time 20 300s 10 Ifsm t 15 10 AVE : 3.40kV 5 10 Rth(j-l) 1 On Glass Epoxi Board 0.1 0.001 1 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100 0 C=200pF R=0 C=100pF R=1.5k 0.01 0.1 1 10 100 1000 ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.A RF071L4S Data Sheet 0A 0V Io t 1.8 T 1.6 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) D.C. 1.4 1.2 1 half sin wave 0.8 0.6 0.4 0.2 D=0.05 D=0.1 D=0.2 D=0.8 D=0.5 VR D=t/T VR=320V Tj=150C 1.2 D.C. AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 1 half sin wave FORWARD POWER DISSIPATION : Pf(W) 0.8 D=0.2 D=0.1 D=0.05 D=0.5 D=0.8 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 D=0.05 half sin wave D=0.2 D.C. 0A 0V t T D=0.8 Io VR D=t/T VR=320V Tj=150C 0.6 D=0.5 0.4 0.2 D=0.1 0 0 0.3 0.6 0.9 1.2 1.5 1.8 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 0 0 30 60 90 120 150 AMBIENT TEMPERATURE : Ta( C) Derating Curve"(Io-Ta) 0 0 30 60 90 120 150 LEAD TEMPARATURE : Tl(C) Derating Curve"(Io-Tl) www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.02 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RF071L4S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |